Nemo Submersible DivingThe Nemo submarine review video

Posted by Rob on October 17, 2022

Sergi Galiano of the renowned Supercar Blondie team reviewed the U-Boat Worx Nemo.
'A submarine that's like a supercar of the sea! The Nemo can take two people below water at a maximum depth of 100 meters. Sergi gives us a closer look at why the Nemo 2 is one of the coolest submarines ever made.'

Nemo Submersible DivingProjects updated

Posted by Rob on April 11, 2022

The Projects page has been updated with our latest design and engineering work.

Certified Sustainable Design AssociateCertified SolidWorks Associate - Simulation

Posted by Rob on February 28, 2022

Rob Wolkers Product Development issued the CSWA-S certification for the knowledge of the FEA tools and functionality of SolidWorks Simulation.

Nemo Submarine Design VideoU-Boat Worx and SolidWorks design process video

Posted by Rob on January 18, 2022

Meet the Nemo design team, and take a deep dive into the design process of the Nemo submersible within this new SolidWorks video
"U-Boat Worx designs and manufactures innovative personal submersibles for exploring the under-sea world. It's critical to keep the sub in balance, so they designed their revolutionary new product, NEMO, using SOLIDWORKS Solutions."

Nemo Submersible InterviewsNemo design and engineering interviews

Posted by Rob on October 1, 2021

Tune in for two more interviews about the Nemo submersible design and engineering at the national SolidWorks 2022 release shows:
October 7 - 11:00 CEST - Cadmes South Africa (English)
October 15 - 10:00 CEST - Cadmes Netherlands (Dutch)

U-Boat Worx Nemo Submersible UnveilNemo unveil at Monaco Yacht Show

Posted by Rob on September 22, 2021

The 2021 Monaco Yacht Show started with great news: the unveiling of the new Nemo submarine, the first series produced submarine in the world.
Visit the Nemo at the U-Boat Worx stand DSP99.

SolidWorks 2022 Whats New Nemo SubmarineInternational SolidWorks 2022 What's New liveshow

Posted by Rob on September 8, 2021

Mark your calendar!
The SolidWorks 2022 What's New Liveshow at September 16 starting at 17:00 CEST, featuring the U-Boat Worx Nemo submersible and where Rob will be interviewed about the design and development of this 2 person submersible.

VR Design And ValidationVirtual Reality Design & Validation

Posted by Rob on April 6, 2021

Our new VR setup allows us to do quick and efficient conceptual sketching and surfacing within a true 3D environment.
Furthermore, it is a great tool for design reviews in VR and product optimization before investing in physical prototypes.

SolidWorks Champions MemberMember of the SolidWorks Champion Program

Posted by Rob on July 9, 2020

We are honoured to hear we have been accepted as a member of the SolidWorks Champion Program.
"This new program aims to acknowledge and connect community members in industry from around the world who are not only certified within the SolidWorks Certification Program but have displayed exceptional levels of involvement in both online and offline spaces within the design and engineering community."

3D Scanning Reverse Engineering3D scanning service available

Posted by Rob on August 1, 2019

To support our design and engineering services, we can now offer a 3D scanning service with a Sense Two 3D scanner for more efficient and accurate reverse engineering of parts, prototypes and shapes.

Certified Sustainable Design AssociateCertified SolidWorks Associate - Additive Manufacturing

Posted by Rob on June 7, 2018

Rob Wolkers Product Development issued the new CSWA-AM certification by SolidWorks about Additive Manufacturing and 3D Printing.

Avion Phantom 320Third prize Mako Boardsports travelcase designcontest

Posted by Rob on February 7, 2018

We are honored our entry has won the third prize in the SolidWorks and Mako Boardsports jetboard travelcase designcontest.
The concaved triangular kevlar/carbonfiber shape provides maximum strength and stiffness to protect the jetboard from impact from all sides. The symmetric design ensures a very cost efficient single mold production. Saltwater-proof materials and smart details like Goretex vents, Aerocatch locks and integrated roofrack strap tunnels make it a durable and quality product.
Thank you Mako Boardsports and SolidWorks for this fantastic prize!

Avion Phantom 320Avion A320 simulator EASA level-D qualified

Posted by Rob on November 6, 2017

The highly innovative Avion Airbus A320 full flight motion simulator has been qualified by EASA for level-D operations, the highest level of FFS (Full Flight Simulation) qualification available.

Avion FFS A320Design in the age of experience VR showcase

Posted by Rob on March 24, 2017

Our Avion A320 flight simulator design will be the showcase model for a Virtual Reality demonstration at the 'Design in the age of experience' conference organised by Dassault Systemes. Put on the VR glasses and experience a walk around and into the flight simulator with this great new 3D design and evaluation tool.
Ongoing demonstration at the 'Design in the age of experience' conference, 4-5 April 2017, Milan, Italy.

EV compact car10 years young!

Posted by Rob on May 1, 2015

On the first of May 2005, Rob Wolkers officially started his industrial design and engineering company. Exactly a decade later, our portfolio is filled with hundreds of products, with even more dream projects under construction. A perfect time to thank all our customers for the cooperation and great projects we have been working on. We are looking forward to continue this success with you!

3D Printing3D printing service available

Posted by Rob on July 25, 2014

To support our design and engineering services, we can now offer a quick and economic way to validate your product ideas and concepts with our new Ultimaker2+ 3D printer.

Pretwisted FinsProjects updated

Posted by Rob on May 16, 2014

It has been another busy year, both in the studio and onsite at freelance projects. About time to add a selection of new projects, and with two more projects in tooling stage stay tuned for more product releases soon.

FEAGuest lecture at Hogeschool Utrecht

Posted by Rob on May 2, 2013

Please join us for a guest lecture about the eeeeFUN scooter design process, with a focus on Design For Manufacturing (DFM) and injection moulded parts.
Date: 7th of May 2013 -11h50
Location: Hogeschool Utrecht - Nijenoord 1 - Lecture hall 2

CSWP-DRWTCertified SolidWorks Professional - Advanced Drawing Tools

Posted by Rob on April 2, 2013

Rob Wolkers Product Development issued the new Advanced Drawing Tools Certification (CSWP-DRWT) about the principles of the 2D drawing tools and functionality found in the SolidWorks drawing environment.

SolidWorks EngineeringNew design and engineering tools

Posted by Rob on January 24, 2013

Extended capabilities and a more efficient workflow thanks to two new 3D CAD software packages:
-SolidWorks Premium upgrade: stress, strenght and stiffnes simulation with Finite Element Analysis (FEA), and easy import and processing of 3D scanned data.
-Power Surfacing: quick concept modeling and powerful freeform surfacing within the engineering environment.

Good Industrial Design Award 2012Good Industrial Design Special Award for Excellence - Originality

Posted by Rob on October 25, 2012

A very pleasant surprise at the Good Industrial Design award show at the Dutch Design Week: the eeeeFUN scooter won one of the exclusive Special Awards for Excellence - the originality category! We feel very honoured and this award is a big compliment for the whole team who put a lot of time, effort and passion into the design and development of the scooter.
If you want to know more about the research and development, please visit the Cadmes Event 2012 (Utrecht, 30th October) for a presentation/interview about the design process of the scooter.

Good Industrial Design Award 2012eeeeFUN scooter wins Good Industrial Design Award 2012

Posted by Rob on October 14, 2012

The second design award for the eeeeFUN electric scooter: the Dutch Good Industrial Design Award
The independent jury felt that the scooter satisfied all the GIO criteria, and therefore received the predicate Good Industrial Design 2012.

Red Dot Design Award Product Design 2012eeeeFUN electric scooter awarded Red Dot Product Design Award 2012

Posted by Rob on March 15, 2012

Rob Wolkers and eeeeFUN Company convinced the international expert jury of the Red Dot Award Product Design 2012. After an evaluation process lasting several days, it received one of the coveted awards, assigned by a 30-member expert jury. Creative heads and manufacturers from all over the world had submitted 4,515 designs altogether to the renowned product competition. With its high design quality, the eeeeFUN electric scooter could inspire the experts. It received the globally sought-after red dot for its fine design language in the vehicle & transportation category:
"Individuality, eco-friendliness, smart details – this electric scooter features all desirable attributes of a contemporary two-wheeler for a younger target group. The jury likewise found the scooter’s LED illumination concept to be convincing."

Certified Sustainable Design AssociateCertified Sustainable Design Associate

Posted by Rob on March 15, 2012

Rob Wolkers Product Development issued the brand new Sustainable Design Certification (CSDA) by SolidWorks about the principles of environmental assessment and sustainable design.

Automotive Frame DesignInternship Vacancy - Automotive Engineering Student

Posted by Rob on February 6, 2012

Are you a highly skilled Bachelor or Master automotive engineering student, advanced SolidWorks user, and most of all passionate about automotive engineering? Than we might have a dream internship postion for you. Status: vacancy closed.

eeeefun e80 @ SWW12eeeeFUN at SolidWorks World 2012

Posted by Rob on January 22, 2012

I'm happy to announce that there will be an eeeeFUN electric scooter at the SolidWorks World 2012 convention. Find the e80 deep black carbon edition at the product showcase within the Partner Pavilion. See you in San Diego.
Thinking about buying one? Read the very positive eeeeFUN review in Scooter Xpress magazine nr.55, december 2011 issue.

Engineer vs DesignerEngineer vs Designer episode 11: Rob Wolkers

Posted by Rob on October 11, 2011

"This week Engineer vs Designer is discussing the future of consumer-driven design, and we'll be speaking with special guest Rob Wolkers, founder of Rob Wolkers Product Development in the Netherlands and winner of the SolidWorks International Design Contest." Thank you Josh of and Adam of for having me on the show.

Projects V7.2v7.2 online

Posted by Rob on May 17, 2011

A fresh update of the site: lighter, faster, improved functionality, better navigation and optimized for mobile browsers.

eeeeFUN and EV-BoxRob at AutoRAI 2011

Posted by Rob on April 8, 2011

A short presentation/showcase by Rob at the High Tech Automotive Campus/SolidWorks stand: thursday 14th of April - 12.30 and 14.00
Next to that you may find 3 of our designs at the AutoRAI 2011 exhibition:
- eeeeFUN electric scooter at the Pioneer stand
- EV-Box electric vehicle charging station at various stands 
- Flow umbrella in cooperation with Kenneth Veenenbos Industrial Design

eeee-FuneeeeFUN electric scooter preview...

Posted by Rob on January 25, 2011

Our latest project, as seen on the MPH show London and SolidWorks World Texas: the brand new eeeeFUN electric scooter. Stay tuned for more info...

Let's Go DesignTest drive the ultimate CAD chair at SolidWorks World 2011

Posted by Rob on January 20, 2011

The ultimate CAD chair from the Let's Go Design interactive web series, try it yourself at SolidWorks World 2011 in San Antonio, Texas. See you there!
Sunday 23-1-2011: 5:30pm - 7:30pm (during the evening reception)
Monday 24-1-2011: 12:00pm - 1:30pm and 6:00pm - 8:00pm
Tuesday 25-1-2011: 12:00pm - 1:30pm

Ultimate CAD ChairLet's Go Design - Episode 4, Featuring Rob Wolkers

Posted by Rob on August 10, 2010

Let's Go Design - The fourth episode of this interactive web series by SolidWorks is live now!
In this episode, Rob shows his vision to the ultimate CAD chair. Host Jeremy Luchini explores surface modeling and invites a sustainability expert to help make the design more green.

CSWECertified SolidWorks Expert, a new top level certification

Posted by Rob on February 27, 2010

It was one of the many highlights at SolidWorks World 2010 in California: the announcement of the SolidWorks Expert Certification.
It's a new top level exam for Certified Professionals (with at least three advanced certifications) only. At this time, only 75 people worldwide are qualified to take the exam. Rob has successfully passed the CSWE exam and is the first SolidWorks user worldwide with the exclusive SolidWorks Expert Certification

CSWP-MTLSCertified SolidWorks Professional - Advanced Mold Tools & Weldments Specialist

Posted by Rob on January 8, 2010

Two brand new certifications by SolidWorks 3D CAD software, and both issued: Advanced Mold Tools and Weldments Functionality

CSWP-STMLCertified SolidWorks Professional - Advanced Sheet Metal Specialist

Posted by Rob on September 7, 2009

Another CSWP certification: Rob Wolkers Product Development has successfully passed the CSWP-STML exam and is now a Certified SolidWorks Advanced Sheet Metal Specialist too.

iCoaster SwitchtrackPrizes donated to Ronald McDonald House Charities

Posted by Rob on May 4, 2009

The designcontest prizes have arrived!
SolidWorks Corporation shipped two very big boxes full of MegaBrands toys. They have been donated to the Ronald McDonald house in The Hague. As many families travel far from home to get treatment for their seriously ill or injured children, Ronald McDonald Houses offer families a way to stay together in proximity to the treatment hospital.

CSWP-SURFCertified SolidWorks Professional - Advanced Surfacing Specialist

Posted by Rob on March 27, 2009

Next to the CSWA and CSWP-CORE certification exams, Rob Wolkers Product Development has successfully passed the CSWP-SURF exams and is now a Certified SolidWorks Advanced Surfacing Specialist too.

iCoaster SpeedtrapWinner of the MegaBrands iCoaster design contest

Posted by Rob on March 18, 2009

At SolidWorks World 2009 in Orlando, the winner of the Mega Brands iCoaster designcontest was announced. Rob won the Grand Prize in this contest with no less than three new exciting stunt ideas for the Mega Brands iCoaster toy series. The jury: "It was an easy decision based on the modeling, animations, and the thought put into the submission."

Metal Business Card Rob WolkersNew business cards

Posted by Rob on March 18, 2009

The coolest business card in town: laser cutted and engraved stainless steel with three handy breakaway wrenches, metric sizes 5 to 10.

CSWACertified SolidWorks Associate

Posted by Rob on February 23, 2009

Next to the CSWP certification, Rob Wolkers Product Development has successfully passed the CSWA exam and is now a Certified SolidWorks Associate too.

SolidWorks World 2009, OrlandoElementz main model at SolidWorks World '09

Posted by Rob on February 8, 2009

Rob's Elementz was the main presentation model at the international SolidWorks World 2009 event in Orlando, Florida. With previews into the future of SolidWorks, speakers like Richard Branson, 4500 highly motivated attendees, numerous of workshops and presentations it definitely was a week full of inspiration. See you at SolidWorks World 2010!

CSWP-CORECertified SolidWorks Professional - Core Solid Modeling

Posted by Rob on June 8, 2008

Rob Wolkers Product Development has successfully passed the CSWP-CORE exams and is now a Certified SolidWorks Professional

Elementz automotive conceptFirst prize SolidWorks international designcontest

Posted by Rob on February 16, 2008

After winning the Dutch designcontest, the Elementz strikes again! At the third day of the SolidWorks World '08 conference in San Diego, the winners of this year's designcontest were announced. An updated and refreshed model of the Elementz won the first prize in this international contest.

Elementz Section ViewElementz winner dutch designcontest

Posted by Rob on September 7, 2007

After two exciting election rounds with almost 60 designs, the Elementz was chosen by both the professional jury and the public to be the grand winner of the Dutch designcontest. From now on you may find Rob conquering the roads in his vintage roadster. Thank you Burton Car Company and SolidWorks Holland for this fantastic prize, and a very special thanks to those who voted for the Elementz!

G/TRAXWinner SolidWorks international designcontest 'complex shapes' category

Posted by Rob on February 12, 2006

After being nominated for the complex shapes category at the international SolidWorks designcontest 2005, Rob took away the first prize in this category with his model of the G/TRAX next gen automotive project.